1. Furnace treatment, easy to operate, but the operator must be responsible and do the usual checks and tests to achieve the desired results.
2. Descaling should be done before adding anti-scaling agent to prevent the old scale from falling off and blocking the pipeline. After the fire is extinguished, the boiler is drained once, and the water level changes are noticed.
3. Regular inspection, check the furnace once after adding the medicine for one month, remove the old scale and accumulated water residue, and check the anti-scaling effect.
According to the principle of synergy between the scaling and corrosion laws of hot water boilers, the anti-corrosion institute of the Ministry of Chemical Industry has developed a new generation of boilers and cooling circulating water systems to prevent scale and deoxidation. The corrosion inhibition rate, the scale inhibition rate and the corrosion inhibition rate of the deactivated boiler are higher than 99% under the conditions of normal movement of the equipment and the boiler. In addition, other existing pharmaceutical technologies and products are estimated, thereby breaking the inconvenience and cost increase caused by the use of the conventional single agent, and the actual cost of the agent is only 1/4 of the resin softening method, 1/6 of the oxygen scavenger, and 1/7 of the oxygen generator, the result is a change of the traditional boiler operation and shutdown separately to maintain the anti-corrosion mode, the first continuous method, the technology does not need to prepare expensive deaerator and ion exchange resin equipment, no need to run The deaeration operation does not require cleaning and operation when the boiler is restarted. This technology has the characteristics of energy saving, water saving, and cost saving to extend the service life of the boiler.